Dynamic Probe Super Heavy Test

Dynamic probe super heavy test is a simple, economical test for percussively testing strength in soil and rock. It is similar to a Standard Penetration Test (SPT) but with different drop weight and heights.

The test equipment consists of a 90° sacrificial or retained cone, a series of extension rods and a hammer with variable mass and drop height. It can be used to generate correlations with other tests and geotechnical parameters.

What is Dynamic Probing?

Dynamic probing is a common method of ground investigation which can be used as an alternative to Standard Penetration Testing (SPT) in certain situations. The test involves driving a rod with an oversize point at its base into the ground with a uniform hammer blow. The number of blows for every 100mm of driving is recorded and the results plotted against depth.

The test can be used to locate boundaries between different strata of differing density or driving resistance and the test can also help to identify voids or cavities within the ground. However, it is important to note that the results of the test do not indicate the composition or properties of the soil, nor can any soil samples be retrieved.

MCD offer two types of dynamic probe equipment; light and super heavy, both based on the dimensions of the sacrificial cone and mass/drop height of the hammer. DPSH test readings are converted to Dynamic Probing Point Resistance (DPPRT) values which can be used to estimate Ultimate Compressive Strength (UCS) using established correlations.

DPSH Equipment

DPSH is an efficient and cost-effective geotechnical investigation method used to determine the strength of soils and soft rock in-situ. It is quick and easy to setup and can be completed on-site within 10 minutes per test. The rig can also be used to locate areas of made ground, solution features, tunnels and other underground voids and cavities.

The equipment is simple, relatively inexpensive and robust which allows a greater number of tests to be conducted in a day than would be possible with a shell and augur rig. Additionally, the system is portable which means that testing can be undertaken in locations where access may not be feasible with a larger rig.

Our GRIZZLY instrumented DPSH meets EN ISO 22476-2: Geotechnical investigation and testing – Field testing – Part 2 – Dynamic probing – Heavy (DPSH) and Light (DPL). It’s powered by a constant energy, heavyweight dynamic cone penetrometer that can be used to test to depths of up to 10-15 m in suitable soils.

DPSH Test Procedure

We provide a comprehensive site investigation service using a range of testing methods including trial pitting, cable percussion boring, rotary core drilling, dynamic probing and window sampling. We have a range of rubber tracked or wheeled probes that are ideally suited to site investigations where access is limited and a lighter piece of equipment is required.

The DPSH test can be used to compare the strength of a soil in a continuous manner or to establish a profile of resistance with depth. The test involves driving a 90o sacrificial or fixed cone into the ground and counting the number of blows per 100mm penetration of the rod string. The results are then correlated to the Standard Penetration Test (SPT) by assuming that the hammer weight and drop height of the SPT and the probe have similar dimensions.

The DPSH can be used in conjunction with the light and medium mass DPSH tests or with the heavy hammer to provide a continuous log of soil resistance across a site. The resulting blow counts are plotted as a graph and can be imported into our ‘Stratigraphy’ software for interpretation.

DPSH Results

DPSH is a specialized evaluation technique for subsurface conditions. It involves driving a solid 90o cone at the end of a rod string into the ground using a uniform hammer strike and recording blow counts for each 100mm of penetration. The results are plotted and correlated to standard penetration test (SPT) data. Our rigs are capable of measuring to depths of 10-15m, depending on the soil type.

Compared to the SPT, which measures only the force and displacement of the tip during a single test point, DPSH provides continuous information about the force and energy of the tip during its penetration into the soil. Therefore, a deeper understanding of the mechanism of advancement can be gained through this method.

The equivalence of DPSH results to SPT N values and undrained shear strengths has been a controversial subject in the geotechnical industry. It is generally agreed that the equivalence is not linear and that there is a threshold amount of energy needed to produce penetration (known as Th). Consequently, a different calculation method must be used for determining the actual value of energy at the rods (EntHRUcone).

Sex Dolls

Sex dolls are ideal for people who want to explore their own sexual fantasies. They can also be a great companion for someone who feels lonely or depressed.

They’re typically made from silicone or thermoplastic elastomer, and can be very lifelike. They can also come with removable or swappable heads, hair, and genitalia.

Material

One of the most common materials used to make sex dolls is TPE. This is a flexible, durable material that can be molded into different shapes. It’s also hypoallergenic and non-toxic, making it an ideal choice for sex dolls. It’s also water-resistant and can withstand repeated use.

Another common material is silicone, which is used to make premium sex dolls. It’s considered the best material for sex dolls because it’s soft and durable. It’s also waterproof, which makes it easy to clean. It’s also odour-free and stretches to fit your body.

Many people use sex dolls for personal satisfaction and sexual pleasure. They can provide relief from anxiety and depression. They can also help people who have trouble forming intimate relationships. However, there are still some stigmas associated with the use of sex dolls. People should be aware of these stigmas and take steps to educate others. The use of sex dolls is a safe and consensual way to fulfill fantasies.

Size

Depending on your budget and preference, you can find a realistic sex doll that fits perfectly. For newbies, it is best to choose a smaller and lighter doll to get the hang of things before moving on to a bigger heavier one.

Sex dolls are a great way to explore fantasies and satisfy sexual desires without the risks of real-world relationships. They can help you overcome anxiety and build confidence in your abilities. These toys also offer a variety of health benefits, such as the release of feel-good hormones and stress relief.

However, it is important to understand that sex dolls are much heavier than they seem. This is because they are made from silicone or TPE materials. In addition, sex dolls are crafted to be as realistic as possible, so they will have a weight comparable to that of a real woman. They are also highly customizable and may come with an inbuilt vagina or insertable orifices.

Customization

In addition to the basic options, sex dolls also come with a variety of other customizable features that can make the experience more intimate and realistic. These include body customization, moans, and other accessories. You can even purchase sex dolls that have removable penises for a more sexually stimulating experience.

Most sex doll manufacturers offer multiple cosmetic options, including areola color and size, vagina labia color, and fingernail color. These cosmetic options are painted on, and they will eventually fade or need to be re-applied.

Another option is the body type and height. Many people choose a smaller or taller love doll to match their own sexual fantasies. This customization is a great way to bring the doll closer to your expectations and preferences. You can also choose whether you want your doll to have articulated or gear joints. Articulated joints are the default option, while gear joints provide more flexibility. This makes it easier to position your doll in sex poses.

Safety

Sex dolls require regular cleaning and maintenance to ensure their longevity. This includes using a mild soap and warm water to clean the surface and specialized cleaners for any internal parts. It’s also important to store the doll properly and avoid exposing it to extreme temperatures or direct sunlight.

Medical-grade silicone is the most durable material for sex dolls, as it’s non-porous, latex-free, phthalate-free, and hypoallergenic. It also repels odors and will last a lifetime with proper care. In addition to lubrication, it’s important to use renewal powder regularly to extend the life of your doll.

Despite the stigma and taboos surrounding sex dolls, they can provide an exciting new sexual experience for users. However, it’s crucial to use plenty of lubrication and take breaks if you feel uncomfortable or pain. In addition, it’s a good idea to practice with a partner before trying a sex doll alone. This will help you get more comfortable with the experience and prevent injuries.

What is a Transportable House?

A transportable house is a great alternative to buying a traditional home. It’s a cheaper option and can be customized to suit your family’s needs.

These homes are also more cost effective than traditional houses because they don’t require additional costs for tradesmen travelling to and from work every day. They’re also more energy efficient and are a lot easier to maintain.

Cost

A transportable house is any home that can be moved from one location to another, either temporarily or permanently. This type of home may also be called a relocatable home, modular prefab or a tiny home. They typically cost less than traditional homes because they are constructed faster. This means that homeowners can avoid the high costs of renting while they wait for their home to be built on-site.

Due to the production line style of factory construction and bulk purchasing of materials, most builders are able to offer transportable homes or granny flats at a discount compared with site built houses. In addition, many transportable homes are designed for optimal durability.

This means that they can withstand irregular movement and harsh weather conditions, making them a great option for rural or remote areas. In addition, transportable homes are typically more affordable than onsite construction because they eliminate the need to pay for hefty travel and accommodation costs for builders.

Convenience

While some neighbourhood Home Owners’ Associations may be against transportable homes, these structures can be very stylish and provide the comfort of a traditional home. They can be customised to meet the needs of your family, and they are quick to build. This type of house is also great for people who need a temporary home, such as for disaster relief or construction.

The fact that these houses are portable makes them ideal for those who want to travel or explore new areas. They can be adapted to different weather conditions, making them a good choice for those who love to experience the outdoors. These houses can be used as offices, classrooms, storage units or for living purposes, and many manufacturers offer various options.

Contrary to popular belief, relocatable homes can be as spacious as any other type of dwelling. They are built with high-grade materials that can withstand rigorous movement and rough weather conditions.

Energy Efficiency

When most people think of a house, they imagine a traditional residence. While this may be a dream for some, it can become expensive when considering heating and maintenance costs. However, a transportable home is an ideal option for those who want to save on living expenses.

Unlike traditional homes, transportable houses are built in a factory. This means they can be completed up to 40% faster than a traditional site-built house. This isn’t due to cutting corners or using cheaper solutions, but because construction occurs in a controlled environment. This allows tradesmen to work without the interruption of weather conditions which can slow construction and delay delivery of supplies.

In addition to speed, transportable homes can also be more energy efficient than traditional sites. They can include features that reduce energy use, such as windows that let in a lot of natural light or toilets that require less water. They can also be designed to fit in small spaces and can be relocated easily.

Flexibility

When people hear the term ‘transportable house’, they often think of a standard cookie-cutter building that can be moved from one site to another. However, with innovative technology, these structures are becoming real works of art. In fact, just type ‘transportable homes’ into Pinterest and you will be overwhelmed with the variety of designs.

These types of houses are ideal for those who want to live in the country but don’t have enough money to buy a conventional home. They are also a great choice for families that are relocating and need temporary accommodation.

Because they are built offsite, these homes are much cheaper than site-built ones. In addition, they can be built up to 40% faster than traditional sites. This is because builders can work uninterrupted and because they don’t need to wait for weather conditions to allow construction to progress. This can significantly cut costs for builders, materials, transport, and site preparation. Moreover, these types of homes are covered by different insurance policies than traditional houses.

Private Label Honey Manufacturer

Manufacturer of organic and non-gmo food ingredients for retail and foodservice industries. Products include raw honey, agave sweeteners and other natural products. Private label manufacturing and sourcing services are also offered.

Many grocery retailers and club stores sell True Source Certified TM honey, which ensures that the product comes from high-quality, legal sources and is traceable. However, some producers and importers bypass quality controls and tariffs to export illegal honey into the U.S.

Natural sweetener

There are a number of natural sweeteners that can be used to add flavor and sweetness to private label honey. For example, agave nectar is becoming increasingly popular in clean label foods and drinks. Other options include maple syrup and stevia extract. The latter is a low-calorie sweetener that is also diabetic and KETO friendly.

In addition to its sweet taste, natural sugar substitutes can provide benefits such as fiber and enzymes. In addition, they may have less of an impact on blood glucose levels. However, people with diabetes should still check with their doctor before incorporating them into their diet.

Natural ingredients like shea butter and manuka honey can be found in a wide range of skincare products. They can soothe and moisturize the skin, as well as reduce redness and irritation. They are also rich in antioxidants and other nutrients. However, it is important to choose a high-quality, organic product. It should be free of pesticides and synthetic preservatives.

Food ingredient

Manufacturer of standard and custom private label snacks and food ingredients. Products include preserves, marmalades, fruit spreads, pickles, oils, salad dressings and cooking mixes. Selection also includes barbeque sauces, mustards and seasonings. Company also offers jars, bottles and containers as well as corporate gift options. Serves grocery stores and high end retailers.

Provides organic, natural and non-gmo food ingredients for retail and food service industries. Suitable for bakeries, food manufacturers and restaurants. Offers organic and natural sweeteners including honey, agave syrup and molasses. Also provides bulk quantity sizes ranging from 12oz jars to 3,200lb returnable IBC totes. Contract manufacturing services and private labeling are available.

Kamagra 100mg – What Are the Side Effects of Kamagra 100mg?

Kamagra 100mg is a medication used to treat erectile dysfunction in men. It works by relaxing the blood vessels and increasing blood flow into the penis. It can be taken up to an hour before sexual activity.

This medication can interact dangerously with certain drugs, including nitrates and some heart medications. It’s important to tell your doctor about all of your medicines and supplements.

Erectile Dysfunction

Many men suffer from erectile dysfunction (ED). This can be embarrassing for the individual and their partner. Sadly, this can also lead to men purchasing knockoff or unlicensed treatments for ED that can be ineffective at best and dangerous at worst.

Kamagra oral jelly is a branded treatment for erectile dysfunction. It contains sildenafil citrate, the same active ingredient found in Viagra. It works by relaxing the blood vessels in the penis, allowing more blood to flow into them. This allows the user to achieve and maintain an erection during sexual activity.

Kamagra is an effective treatment for erectile dysfunction, and it is safe to use if taken correctly. However, it should not be used if you take medications for heart problems or high blood pressure like nitrates. Your doctor can check your medical history and determine whether or not this medication is right for you. They can also rule out any serious underlying conditions that could be the cause of your erectile dysfunction.

Pulmonary Arterial Hypertension

Pulmonary arterial hypertension is high blood pressure in the arteries that supply oxygen to your lungs. It can be caused by heart problems, but it can also be a side effect of some medicines or a condition.

In pulmonary hypertension, the small arteries that carry blood through your lungs narrow in diameter, which increases resistance to blood flow. This makes your right side of the heart work harder than normal to pump blood through these vessels to your lungs, where it picks up oxygen. Your lungs then return the oxygen-rich blood to your lower left heart chamber, the left ventricle, which pumps it to the rest of your body.

If you take a PDE5 inhibitor, such as sildenafil (Viagra), with certain medications, you can experience a sudden drop in your blood pressure. This can be life-threatening. This is why you should always let your doctor know if you’re taking any other medicines. They’re best able to spot potential bad interactions.

Premature Ejaculation

Premature ejaculation, or PE, is when you orgasm sooner than you or your partner would like during intercourse. It can happen with any sexual partner, and it can be caused by a variety of things. It can be a psychological or emotional problem, or it can be caused by a physical condition or medication.

PE can be a serious problem for both you and your partner, especially when it happens repeatedly. It can lead to a lack of satisfaction during sex, and it can also cause problems with fertility. Luckily, there are many ways to treat PE, including medications and behavioral techniques.

Your doctor will start by asking questions about your sexual history and your relationships. They will also likely do a physical exam. If the PE is caused by a mental or emotional issue, they may refer you to a counselor who works with people who have trouble with sex. If it is caused by a physical condition, they might recommend a visit to a urologist.

Impotence

Impotence can be a very distressing condition for both the sufferer and their partner. It can be caused by a number of different things and it is important that you see your doctor if you are suffering from it. They will assess your general health and can treat the underlying cause of your impotence. They can also advise you on how to manage the problem and help you find a solution to deal with it.

Treatment options include Sildenafil (under the brand name Viagra), tadalafil (under the brand name Cialis), or vardenafil (under the brand name Levitra). These medicines are taken by mouth and they work by relaxing the blood vessels in the penis. This allows blood to flow into the penis and helps with erections.

Kamagra tablets are available online but it is important to only purchase them from a trusted pharmacy that complies with existing standards. Be aware that coloured tablets and effervescent tablets may be fraudulent.

A Guide to Gates and Balustrades in Tauranga

A gate completes the aesthetic design of your property and also provides boundary fencing and security. Your gates should be easy to open and close, as well as being durable enough to withstand harsh weather conditions.

If you’re unsure about which type of gate would suit your home, talk to Tauranga’s fence and gate specialists. They’ll help you choose a gate that matches your existing fence structure and style.

Vertical Pivot Gates

A vertical lift gate system is a great vehicle barrier solution when the ground or terrain doesn’t allow for swing gate or slide gate installations. They open and close by lifting up and down, like a railroad crossing arm.

They provide much faster vehicular processing speeds compared to slide gates. They can typically open or shut in 8 seconds, making them ideal for high volume control points.

Because they are heavy metal pieces of machinery moving up and down on a set of grooves, they must be properly maintained to ensure safe, quality operation. This is true of any gate system, but it is particularly important with VPGs because they don’t hide internal components away from pedestrian traffic like slide gates do. External components such as the drive chain and rail systems must be kept clean of ice, debris, and other environmental factors. These must also be lubricated, tensioned, and adjusted regularly to avoid operational failures or safety issues.

Bi-Folding Gates

The bi-fold gate is a great solution for driveways that are quite narrow as it only requires half the space of a normal swing gate. It is especially helpful if your driveway slopes upwards from the road and it would be difficult to fit in an inwards swinging gate.

A bi-fold gate is also useful if you have limited space because it can be opened from either direction and it doesn’t need to clear a whole lot of room like a swing or sliding gate. Another advantage is that it’s a bit more secure than a swing gate because you can be sure the hinges are securely fastened to the ground and not the wall.

Field Measurements: Inspect opening by recorder measurements and compare with shop drawings. Check for conformance with fabrication tolerances and the requirements indicated for kind, size and finish of accessory fittings and hardware. Ensure that all gates are ready for installation when delivered and that the site is prepared for them.

Electric Gates

Electrified gates protect farm animals and deter thieves. They can be used to control livestock in yards, feedlots and on the farm itself. Choose from high visibility electrified tape, swig or multi-strand gate systems. Tauranga Balustrades & Gates provides 100% New Zealand made gates and fencing.

Electric gates need space to move in order to open and close. Any static obstacle including walls, fences and your car in the area your proposed electric gates will open into could prevent them from operating.

An experienced installer will know what safety measures to install in your new electrical gates. They will also understand the laws surrounding gate automation safety.

During installation, electric gates Tauranga can be very heavy and difficult to handle. They are prone to damage unless handled with great care by a trained professional. When a gate is damaged or faulty it can cause serious injury. Badly installed gate automation may result in crushing, shearing or impact injury – the type of injuries that can kill.

Security Gates

A gate is a great way to increase your property’s security and privacy. Not only do they deter opportunistic thieves, but they can also help protect any outdoor assets you own, such as cars, caravans and boats. Having a gate outside your home can also improve your insurance premiums.

Driveway gates are the first thing a visitor will see, so they need to be strong and reliable. Fortunately, Tauranga Balustrades & Gates has an extensive range of gates that are designed for both style and strength.

Swing gates are a popular choice for homeowners, as they offer an attractive appearance with few moving parts. They’re easy to open and shut, but they do require a fairly level section free of obstacles for them to work. For more safety, these gates are fitted with automatic locking devices that can be controlled via a keypad, swipe card or intercom system. All gates are made in New Zealand and come with a powder coating that will last for years.

House Washing Auckland – How it Can Improve Your Home’s Curb Appeal

A regular house wash is a necessary step in the process of maintaining your property. It removes the build up of dirt, mildew and moss that can damage the surface of the paint.

Be sure to use blue nozzles for chemical and white hoses to rinse. This will prevent water and chemicals from getting inside your windows.

Pressure Washing

Pressure washing, also known as power washing, involves a gas or electric motor that powers a pump that concentrates water and sprays it at high-pressure. The resulting blast cleans surfaces like decks, driveways and outdoor furniture, removing accumulated grime in a fraction of the time it takes to scrub by hand.

When done right, a thorough house wash can restore your home’s appearance and extend its lifespan. However, it’s important to choose the right day and know the best ways to carry out a pressure wash to prevent damage.

Mold, mildew, moss and other organisms that build up on buildings and outdoor items eat away at surface coatings and can cause serious damage to materials like wood and concrete. Regular cleanings stop these problems in their tracks by removing them before they take hold. This saves property owners money by preventing costly repairs later on. Moreover, it also enhances the look of your home and increases its resale value.

Pre-Paint Washing

It’s no secret that a home or business’ exterior is its first impression. Whether it’s for general hygiene or sale preparation, getting your house washed on a regular basis can improve the aesthetics of your property and increase its resale value.

Pre-paint washing is essential to ensuring that new paint adheres properly to the existing surface. A thorough wash will remove any dirt build-up, rust or grime and prepare the surface for the application of a fresh coat of paint.

Our team of professionals are experts when it comes to cleaning your exterior, whether it’s your house or commercial building, gutters, decking or driveways. We use effective, concentrated biodegradable cleaner that effectively cleans all surfaces quickly and efficiently. Combined with our professional Auckland house washing techniques, we will give your property the fresh new look it deserves. Contact us today to book your free quote. We can’t wait to hear from you!.

Soft Washing

A soft wash is a cleaning method that uses a combination of biodegradable detergents and low pressure spray to remove dirt, pollen, dust, mildew, mould, algae and moss from surfaces on your home. It’s safe for delicate surfaces such as cladding, and paint surfaces.

It can also be used to clean outdoor furniture and paving, shingles on roofs, driveways, fences and patio enclosures. It’s a great way to get your home ready for sale, as it can give a better first impression to potential buyers.

If you’re planning to do a soft wash yourself, be sure to use proper safety precautions. You’ll need a ladder with a solid surface to sit on, and you should cover any tender plants around your house with large sheets or tarps to protect them from the bleach.

Hiring a professional soft washing company is a much safer option. A reputable company will know what sort of cleaners to use and how strong they need to be for each surface.

Water Blasting

Water blasting is a powerful, eco-friendly and efficient cleaning method that can remove rust, paint, dirt, debris and contamination from different surfaces. It’s suitable for cleaning a wide range of exterior surfaces, and can be used to clean narrow spaces and higher places that would otherwise be difficult to reach using other methods. Unlike chemical-based cleaners, it doesn’t leave any residue and rinsing isn’t necessary. Water blasting is also a great way to enhance the appearance of your property’s windows, gutters, decks and driveways. It can make a huge difference in your home’s curb appeal! Get in touch with us for a free quote today.

Auckland Roofers

Licensed Auckland roofers will ensure that your roofing system is well-maintained and protected from weather damage. They also offer a warranty for their work and materials.

They have a team of expert installers who specialise in repairing concrete and terracotta roofs, shingle and tile roofs as well as those covered with Butynol. They are also experienced in repairing storm damages and leaks.

Shamrock Reroofing

Shamrock Reroofing is a family-owned and operated company with over 20 years of experience in the industry. They offer a variety of roofing services, including repairs and installations, as well as waterproof coatings. They also specialize in tile roofs, which can add value to your property and are extremely durable.

They use only New Zealand-made products, so you can be sure that the materials are high-quality and will last. They are also big believers in preventive maintenance, and will inspect your roofs at least once a year and make necessary repairs. They can also replace your gutters and spouting while they are at it.

They are a member of the Licensed Building Practitioners, and are partnered and preferred installers for ColorSteel and Steel & Tube NZ. Their team of professionals are screened for character, skills, and professionalism before they are sent out to your home. They are also insured for your peace of mind. If you are considering a new roof, they will provide you with a comprehensive quote before starting work.

Enviro Roof Control

The company offers a variety of roofing services, including roof repair and replacement, and roof painting. Its affordable rates and expert craftsmanship make it a top choice for homeowners in Auckland. They have been in business for over two decades and service the North, East, and South of Auckland. Their staff is certified to do roof repairs and is licensed to operate a building site.

The team at Enviro Roof Control is experienced in handling both concrete and clay roofs. They also provide roof restoration and maintenance services for shingle, tile, and Butyn roofs. They can remove moss and lichen with a biodegradable softwash solution and can replace cracked tiles or leaky gutters.

Roofing contractors should always begin their work with a safety check to mitigate risks. Using safety checklists can help them identify hazards before they cause injuries to their workers. They should also check the condition of their equipment before starting the work. It is also advisable to photograph the roof at each inspection to document its condition over time.

Auckland Flat Roof & Waterproofing

Whether you’re looking for a roofer to repair a leaky flat roof or need someone to install a new cladding, the right Auckland roofing company can help you. These companies have years of experience and are dedicated to providing high-quality work. They prioritize customer satisfaction and use only the best materials to ensure that your roof lasts for a long time.

Aspect Roofing offers roofing solutions for homes and businesses in the Greater Auckland region. Their team of experts is licensed, insured, and SiteSafe-certified. They also offer competitive pricing and quality craftsmanship. They are committed to completing their work on time and within budget.

They specialise in flat roof installation and maintenance, as well as tile roofing and re-roofing. They have over a decade of experience in the industry and are certified by the New Zealand Roofing Association. They can also provide maintenance and repair services for residential and commercial properties. Their services include water proofing, gutter cleaning, and painting.

Roof Cleaners

If you want your roof to look great and help keep your indoor environment healthy, it’s best to hire a company that uses environmentally friendly methods. Beware of companies that use bleach, especially if you have landscaping or garden beds near the house. Bleach and other chlorine products may contaminate soil, kill plants, or leak into waterways.

Roofing West Auckland offers a range of roofing services such as re-roofing, roof repair, painting, and maintenance. Their qualified and personable team will be happy to explain their work and answer any questions you might have. They also offer roof cleaning using a biodegradable soft wash solution.

Besides re-roofing, this team of Auckland roofers can also repair tile roofs and those covered with Butynol, as well as guttering, fascia, and spouting. They also specialise in installing long run Colorsteel or Colorcote roofing and exterior wall cladding made from the finest materials from the top manufacturers. They can also replace concrete, terra cotta, or shingle roofs and remove health-endangering asbestos.

Polystyrene Foam Board

Styrofoam is a familiar material we see everywhere from insulated coffee cups to packing peanuts. What we know as styrofoam insulation, however, is actually closed-cell extruded polystyrene foam board (EPS or XPS).

Foam boards are rigid panels that can be used to insulate any exposed cavity in your home or pole barn. They’re lightweight, inexpensive and moisture resistant.

Insulation

Polystyrene foam board is a versatile and effective form of insulation. It is an eco-friendly choice for builders and homeowners seeking to meet energy efficiency standards. Unlike PIR and PUR, which contain chemical products that decrease their insulating abilities over time, EPS and XPS are made with only one material and are easy to recycle.

XPS is manufactured using an extrusion process, which produces a rigid insulation board that has a high R-value and no moisture absorption. It is a durable and cost-effective alternative to other insulation materials, such as wood framing or drywall.

It is easily installed in stud walls with a box knife or a carpenter’s handsaw. To prevent water from penetrating the insulator and causing mold or mildew, it is important to cover it with a layer of drywall upon installation. Properly installed XPS sheathing can significantly reduce air movement through wall cavities, which can rob buildings of energy. It can be secured to studs with 25.4-mm head plastic cap nails or staples long enough to penetrate framing at least 19 mm (0.75 in).

Packaging

The insulating and packaging properties of foam polystyrene are very useful in commercial applications. Food containers like cups, plates and clamshells are often made from this material. This is because EPS can be molded into many shapes to accommodate different products. Moreover, it is lightweight and has superior moisture resistance to protect products from damage and spoilage during transportation.

Unlike other materials, EPS is not a fire hazard, as long as no flame retardant additives or coatings are used. This makes it a good choice for transporting delicate medical equipment and electrical consumer goods. It is also great for insulating products requiring temperature control during storage and shipping.

Foam boards are also commonly used for professional presentations. Stylish and affordable, these thick panels can easily be printed with texts and infographics for a variety of uses. They are also an ideal option for dressing up a stand at a market or conference. This is because they are easy to cut and can be shaped into any shape.

Crafts

You can use these foam rectangles to create one-of-a-kind decorations or party centerpieces. They have a smooth surface that can be decorated with stencils, paint, twine, ribbon and other embellishments to make your project truly unique. The possibilities are endless!

Foam board is lightweight, making it ideal for designers, prop specialists and model crafters. It is also easy to cut and comes in a range of thicknesses. Glues such as hot glue and PVA adhere well to foam boards without damaging the glossy covering.

You can choose between expanded polystyrene foam (EPS), extruded polystyrene foam (XPS) and plastic-based foam options that are more moisture resistant than EPS. The process of producing EPS involves mixing unexpanded styrene beads with a liquid bonding agent and heating them. The resulting material expands and hardens as it cools. This type of foam does not absorb water unless it is subjected to prolonged exposure. For this reason, EPS used in building construction must be covered with an exterior vapor barrier to prevent water-logging.

Other Applications

The smooth panels of foam board can be used for a number of creative applications. For example, they can be easily cut and pasted to produce a unique memory board. Photographers, designers and sculptors use the material to help reflect light or to make models. Foamboard is also commonly used in business windows as a way to draw attention to the services or products they offer. It is often favored by those who enjoy art as it is simple and inexpensive to mount photos on.

Polystyrene board can be cut with a laser, hot wire or razor knife. It can be sanded, painted and coated to enhance its appearance. It is less expensive than other materials, but it will not last as long as wood or other hard boards. It also does not hold paint as well as those materials. Expanded polystyrene (EPS), sometimes called Styrofoam, is a lightweight cellular plastic material made from expanding beads of polystyrene and a bonding agent. It has a relatively low R-Value for its weight and uses up to 98% air. It is the least expensive of today’s foam boards.

Parent Category Visa NZ Reopens

The Parent category visa NZ is a pathway for parents to join adult children who are resident in New Zealand. It has a yearly quota and requires the sponsor to earn 1.5 times the median wage for single sponsorship or twice the median wage for joint sponsors.

The visa holder can only stay in New Zealand for ten years unless they obtain permanent residence or apply for a variation of travel conditions.

1. Health

New Zealand’s healthcare system is free or heavily subsidised for citizens, residents and some visa holders. If you are granted a residence visa, it will include healthcare as part of your travel conditions.

The Parent Category visa allows New Zealand residents and citizens to sponsor their parents for permanent residence in New Zealand. It is open to parents, grandparents and legal guardians. Once you have your visa, you can travel in and out of New Zealand until your travel conditions expire.

Immigration New Zealand has recently announced that the Parent Category EOI will be restarting on 14 November 2022. The quota has been increased and the income threshold for sponsors has been lowered. Joint sponsorship arrangements have also been expanded to allow two adult children to combine their income to meet the required threshold, rather than each child individually. In addition, health and character requirements have been retained. Parents must pass medical examinations and be a bona fide applicant.

2. Character

New Zealand’s government has finally reopened the parent visa category that had been closed since 2016. This will allow parents of current citizens and residents to move permanently to New Zealand with their children as sponsors.

The new system has a cap of 500 visas per year and requires that the sponsor have sufficient income to meet sponsorship requirements. The first random selection of EOIs for the new visa will be held in August 2023. EOIs will stay in the ballot for two years from the date they are submitted.

Applicants will have to demonstrate that they and their sponsor meet the health, character and English language requirements. In addition, they will need to provide an assurance of support. At Visa Matters we can assess your parent’s eligibility for this visa and represent them in their Expression of Interest. We can also assist you with the application process if they are invited to apply for residence by Immigration New Zealand.

3. Income

Parents who are sponsored by an adult New Zealand citizen or resident can apply for a residence visa. This includes permanent and restricted residence options.

Sponsors must meet eligibility requirements and minimum income thresholds. These are updated annually and may increase. It is also possible for siblings to jointly sponsor their parents.

New Zealand has lowered the minimum income threshold for sponsors. This should allow more people to bring their parents into the country. Additionally, it has reopened the Parent Category visa for those who already had an Expression of Interest in the system.

Selections for EOI’s will begin on November 14. They will be selected in order of when they were received by INZ. This should be a welcome change for many people who have been waiting to bring their parents over. It should also help ease the pressure on the existing visa that is currently oversubscribed by a large number of people looking to move their parents to New Zealand.

4. Accommodation

The new rules for the Parent category are aimed at helping parents and grandparents join their adult children in New Zealand. Sponsors must agree to look after the visa holders’ health and welfare needs and provide accommodation for ten years from the date of their residence visa approval. They must also have enough income to meet the minimum threshold and transfer investment funds to New Zealand to cover living expenses.

This visa allows parents and grandparents to work in New Zealand and live in permanent residence, as long as they are able to support themselves financially. They are eligible for healthcare, which is free or subsidised by the government like that of New Zealand citizens and residents.

People interested in pursuing this visa should submit an expression of interest to Immigration NZ (INZ) and pay the required fee. EOIs will remain in the ballot for 2 years from the date they were submitted. INZ will select 500 EOIs each year.